Balt 90124 Assembly Instructions Manual - Page 11
Browse online or download pdf Assembly Instructions Manual for Indoor Furnishing Balt 90124. Balt 90124 15 pages. Single floor carrel
Print Page
5.
Place the Middle Side Panel (P-1) with the Camlocks(C)
facing up and install 2 each Cam Posts (D) in the 2
threaded insert nuts (Pre-installed) as shown
in illustration # 3.
6.
Install 2 each Long Dowels (E) into the holes as shown in illustration # 3.
7.
Attach Middle Side Panel (P-1) to Middle Leg (P-5 ) as shown in illustration
# 3. Secure by turning the Cam Locks (C) 1/4 turn until they lock.
Attach Left Keyboard Slide (P-6) to the Middle Side Panel (P-1) using 2
8.
each Screws (A1) as shown in illustration #3.
9.
Attach 1 Glide Bracket (F) using 1 Socket Screws (A) and 1 Interior
Threaded Posts (B) as shown in illustration #3. Tighten Screws using
Phillips Screwdriver.
Insert 1 Glide (G) into the Glide Bracket (F) as shown in illustration #3.
10.
C
D
P-6
E
A1
To Secure Cam Locks, Insert
Large Phillips Head Screwdriver
and turn Cam Lock 1/4 turn (90
degrees) clockwise.
Be sure that arrow on
top of Camlock (C)
aligns with centerline of
Edge Drilled hole.
D
P-1
Note: (B) screw
is in 1st HOLE
A
B
4
P-1
Centerline of
Edge Drilled
hole.
F
G
Illustration # 3
Phillips
Screwdriver
Arrow
P-5