- ページ 4

室内装飾品 Balt Height Adjustable Flipper Half Round 90178のPDF 組み立て説明書をオンラインで閲覧またはダウンロードできます。Balt Height Adjustable Flipper Half Round 90178 5 ページ。

4.) Place Table Top (P1) upside down on a padded surface. Place the assembly from Step 3 over

the embedded threaded inserts in the Top Panel (P1) as shown in Illustration #3. Attach the

frame assembly to the Top Panel(P1) using two Screws (B) through each Leg's top tube and

one Screw (B1) through the Top Supprt (P5).

Illustration #3

5.)

Place a Spring Washer(G) on the stem of each Locking Caster (C) and screw the caster into

the front hole in each leg as shown in Illustration #4. Place a Spring Washer (G) on the stem

of each Caster (D) and screw into the rear hole in each leg. Use Caster Wrench (F) to

tighten each caster.

Illustration #4