Balt Height Adjustable Flipper Half Round 90178 Instruções de montagem - Página 4
Procurar online ou descarregar pdf Instruções de montagem para Mobiliário de interior Balt Height Adjustable Flipper Half Round 90178. Balt Height Adjustable Flipper Half Round 90178 5 páginas.
Imprimir página
4.) Place Table Top (P1) upside down on a padded surface. Place the assembly from Step 3 over
the embedded threaded inserts in the Top Panel (P1) as shown in Illustration #3. Attach the
frame assembly to the Top Panel(P1) using two Screws (B) through each Leg's top tube and
one Screw (B1) through the Top Supprt (P5).
Illustration #3
B1
B
B
P1
P5
5.)
Place a Spring Washer(G) on the stem of each Locking Caster (C) and screw the caster into
the front hole in each leg as shown in Illustration #4. Place a Spring Washer (G) on the stem
of each Caster (D) and screw into the rear hole in each leg. Use Caster Wrench (F) to
tighten each caster.
G
D
C
D
C
G
Illustration #4
4