- ページ 5

バッテリーチャージャー Balt 27541のPDF 組立説明書をオンラインで閲覧またはダウンロードできます。Balt 27541 11 ページ。 Mobile laptop charging station

Attach Middle Panel (P4) to the Top Panel

(P5) as shown in illustration #3. Secure by

turning the Cam Locks (C1) 1/4 Turn until

they lock.

Attach Bottom Panel (P6) to the Middle Panel (P-4)

using 2 Wood Screws (A2).

Place a Slotted End Panel (P3), large

space at top, in the recess inside the

Right Leg Welded (P2).

Attach Right Leg Welded (P2) to the Top

and Bottom Panels (P5 & P6) using

6 CS Phil Screws (A1) as shown in

illustration #4. Just start the CS Phil

Screws (A1) at this point and do not

tighten.

Press 2 Grommet Sleeves (M1) in

round openings in the Bottom

Panel (P6) as shown

in illustration #4.

Snap Grommet Cap (M2) over

top of Grommet

Sleeves (M1).

Illustration # 3

To Secure Cam Locks,

Insert Large Phillips

Head Screwdriver and

turn Cam Lock 1/4 turn

(90 degrees) clockwise.

Illustration # 4