Balt 27541 조립 지침 매뉴얼 - 페이지 5

{카테고리_이름} Balt 27541에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Balt 27541 11 페이지. Mobile laptop charging station

Attach Middle Panel (P4) to the Top Panel

(P5) as shown in illustration #3. Secure by

turning the Cam Locks (C1) 1/4 Turn until

they lock.

Attach Bottom Panel (P6) to the Middle Panel (P-4)

using 2 Wood Screws (A2).

Place a Slotted End Panel (P3), large

space at top, in the recess inside the

Right Leg Welded (P2).

Attach Right Leg Welded (P2) to the Top

and Bottom Panels (P5 & P6) using

6 CS Phil Screws (A1) as shown in

illustration #4. Just start the CS Phil

Screws (A1) at this point and do not

tighten.

Press 2 Grommet Sleeves (M1) in

round openings in the Bottom

Panel (P6) as shown

in illustration #4.

Snap Grommet Cap (M2) over

top of Grommet

Sleeves (M1).

Illustration # 3

To Secure Cam Locks,

Insert Large Phillips

Head Screwdriver and

turn Cam Lock 1/4 turn

(90 degrees) clockwise.

Illustration # 4