- ページ 2
コントローラー esera automation ECO 208 PROのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。esera automation ECO 208 PRO 18 ページ。 Professional 1-wire controller
ページを印刷する
1
Product description
Sensors and Actuators
The ECO 208 PRO 1-Wire Controller supports up to 30 sensors, actuators, iButton keys or memory devices
(referred to collectively as Devices in the following). Up to 5 data values can be output per 1-Wire device. This
means that the ECO 208 PRO can provide up to 150 data values, which is a very large number and a very good
price per data value ratio.
Data interface
The ECO 208 PRO 1-Wire Controller has a Modbus TCP and ASCII data interface.
You can communicate with your industrial control system, e.g. PLC, monitoring control and data acquisition
systems (SCADA) via the standard Modbus TCP protocol with the ECO 208 PRO Controller.
Thus, the ESERA ECO 208 PRO equiments provide an optimal interface between modern digital
1-Wire devices and your monitoring system.
Modbus Protocol
The Modbus TCP addressing is clearly structured, comparable to many other Modbus systems.
Addresses are available for system and device data.
An address overview with all available data points is available in the download area of our website and within
the configuration software ESERA Config Tool 3.
Autonomous management
The ECO 208 PRO is intended for the autonomous management of a 1-Wire Network. You no longer need to
worry about 1-Wire commands or formulas for evaluating the 1-Wire devices. The ECO 208 PRO
independently scans the 1-Wire Network for new 1-Wire devices, reads their Auto-E-Connect data,
automatically adapts* the device libraries and outputs the adapted data in plain text, adapted to the scanned
1-Wire devices.
Designed for all 1-Wire Networks
The 1-Wire interface of the ECO 208 PRO is specially designed to safely operate small up to very large
1-Wire Networks with long cable distances.
1-Wire devices can be operated simultaneously in mixed parasitic or normal mode.
The currently strongest 1-Wire interface was developed for maximum data security even for complex network
structures.
Formatted data output
The ECO 208 PRO outputs the sensor and actuator data ready-prepared, e.g. for temperature sensors
cyclically in C°. It is only necessary to divide by 100.
In addition, the article number for ESERA-Modules can be entered, the calculation and output is adapted to
the function of the module.
System time / real-time clock
You do not have a real-time clock with battery buffering in your system? No problem, the ECO 208 PRO will
gladly provide the time with date. The real-time clock (RTC) is supplied by a maintenance-free goldcap
(super capacitor) for approx. 2 days in the event of a power failure.
What is a gold cap (super capacitor)? You can find an explanation here:
https://de.wikipedia.org/wiki/Superkondensator
Power supply
For power supply, the ECO 208 PRO has a wide range input from -38VDC to -72VDC and is thus intended
for telecommunication typical -48V system supplies.
Suitable DIN rail or plug-in power supply units can be found in our webshop.
Commissioning
Support videos for commissioning and configuration can be found on our website
"Service and Support", Support Videos.
Note
Basics and Tips on the 1-Wire Bus system can be found in the ESERA Online Shop under
1-Wire Basics or please refer to our eBook in the shop under Training/Documentation.
* if the sensor or actuator supports Auto-E-Connect. For details, please refer to the operating instructions of the sensor or actuator.
All rights reserved. Reproduction as well as electronic duplication of this user guide, complete or in part, requires the written consent of
ESERA GmbH. Errors and technical modification subject to change. ESERA GmbH 2021
www.esera.de
11603-48 V1.0 R1.1 Manual
www.esera.de
under
Page 2 of 18