- ページ 4
コントローラー esera automation ECO 208 PROのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。esera automation ECO 208 PRO 18 ページ。 Professional 1-wire controller
ページを印刷する
4
Technical data
Ethernet interface:
Auto-E-Connect:
Data, Firmware Update
and Configuration
Software Support:
Supply voltage:
Current consumption
Power supply RTC:
1-Wire Interface :
Protective circuits:
Connection:
Output voltage:
Isolation:
Supported
1-Wire devices:
5
Ambient conditons
Temperature, operation: -25°C to +60°C
Storage temperature:
Relative air humidity:
Room classification:
Protection system:
Protection class:
Dimensions:
6
Conformity
EN 50090-2-2
EN 61000-4-2, ESD
EN 61000-4-3, HF
EN 61000-4-4, Burst
EN 61000-4-5, Surge
EN 61000-6-1, interference immunity
EN 61000-6-3, interference radiation
RoHS
7
Display LED
The module has various indicator LEDs. The function of the indicators is as follows
Display
LED Green
LED Green
LED Green
* if the sensor or actuator supports Auto-E-Connect. For details, please refer to the operating instructions of the sensor or actuator.
All rights reserved. Reproduction as well as electronic duplication of this user guide, complete or in part, requires the written consent of
ESERA GmbH. Errors and technical modification subject to change. ESERA GmbH 2021
www.esera.de
- TCP/IP, Socket Server
- 10/100 MBit/s Ethernet Interface, WLAN: 802.11 b/g, LAN 10/100MBit/s
- up to 20 data connections for ModbusTCP
- Auto Negotiation (Full-duplex and Half-duplex)
- Auto MDI/MDIX
- Support for DHCP and fixed IP-Adress
Level I to III supported
ESERA Config Tool 3
ECO Dashboard 100
-38VDC to -72VDC
max. 100mA
Goldcap, buffering of the internal clock (RTC) in case of power failure for approx. 2 days.
In the event of a longer failure, the RTC must be reset.
The Goldcap is charged after approx. 2 hours.
1-Wire Bus (+5V, ground (GND) and data)
ESD, overvoltage and reverse polarity protection.
Push In plug-in terminals (up to 2.5qmm cable cross-section)
+5V (+/-10%), max. 300mA, overload, overvoltage and short-circuit proof
Galvanic isolation between Ethernet and 1-Wire Interface
DS2401, DS1963, DS1990, DS1820, DS18S20, DS18B20, DS2413, DS2438, DS2450
DS2408, DS2405, DS2406 (only input), DS2423, other chips on request.
We will be happy to support other components as an OEM product for you.
-20°C to +70°C
10% to 92% (non condensing)
operate only in dry rooms
IP20
III
106,3 x 90,5 x 62mm (WxHxD)
Designation
Function
PWR
Display for supply voltage
DATA
LAN
LAN - Network Status LED
lights up when LAN - Network connection is established
flashes when the interface is not activated
11603-48 V1.0 R1.1 Manual
after switching on the unit, the LED flashes 3x
flashes during 1-Wire activity
flashes when data is sent via the data interface
flashes very quickly if "KAL Receive" has been
activated and the "KAL Messages" of the control
system are missing.
Page 4 of 18