- ページ 6

ラック＆スタンド 3DUpFitters CR-10 S4のPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。3DUpFitters CR-10 S4 15 ページ。 Enclosure kit

The S4/S5 version also has three new connectors at the top and on the left and rights

side when viewed from the front.

2. Assemble Front Door 

Locate the magnetic latches and use the wood screws to

attach them to the latch mounts. Hand tighten and make

sure they're secure, but do not over tighten or they may

strip. The latch can be later adjusted front-

to-back to make sure the door is ﬂush with

the door frame.

Each latch mount is attached via three

screws. Two M4 10mm cap heads are used

to attach the latch mount to the side, while

a 30mm cap head secures the latch mount

to the door frame.