- ページ 5

会議システム ClearOne CONVERGE PRO 2のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。ClearOne CONVERGE PRO 2 8 ページ。 Next generation audio dsp platform
ClearOne CONVERGE PRO 2 にも：クイック・スタート・マニュアル (9 ページ), クイック・スタート・マニュアル (12 ページ), インストレーション・マニュアル (11 ページ)

CONVERGE® Pro 2

Connecting the CP2

To connect and start to use the CP2, complete the following steps in order:

1. On the back panel, except for connecting a power source, make all appropriate connections.

Note the following information:

Port

Type B USB Port

RS-232 Serial Port

P-Link PoE Port (pass-

through) and P-Link OUT Port

C-Link In and C-Link Out

Ports

2. (Optional) If you want to use CONSOLE AI software to program the CP2 via USB, connect your

computer to the front panel USB port.

3. Connect AC Power.

Warning: This equipment must be connected to an AC mains socket outlet with

a protective earthing connection. The third prong of this connector (ground) is an

important safety feature. Do not attempt to disable this ground connection by using an

adaptor or other method.

4. On the front panel, check the LEDs. Use information in the following table:

Page 4

Notes

To connect to a computer or conferencing device for USB

audio

To connect to an external control device such as an AMX or

Crestron controller

Note: CONSOLE AI software connects through USB or

Ethernet only.

Detailed information is available in the

Pro 2 P-Link Peripheral Products Application

LEDs adjacent to each port indicate connection status and

packet traffic activity.

To connect together multiple CP2 units to create a site.

Warning: Use the C-Link In and C-Link Out ports with

only CONVERGE Pro 2 Devices. Connecting any other

devices to the C-Link In and C-Link Out ports, including

CONVERGE Pro or Beamforming Microphone Array

products results in severe equipment damage.

Quick-Start Guide

PoE and CONVERGE

Note.

QSG-0032-001v1.6 October 2021