- ページ 10

キーボード Akko 5075B-PlusのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Akko 5075B-Plus 12 ページ。

Akko 5075B-Plus ユーザーマニュアル
5075B Plus Connection usage guide
E
Bluetooth Device 1
R
Bluetooth Device 2
T
Bluetooth Device 3
Y
2.4G Wireless Device
U
Wired mode

Bluetooth Pairing

After turning on the keyboard, press FN+E/R/T to enter Bluetooth mode. Press and hold the FN+E/R/T combination key
for 3 seconds to put the keyboard in pairing mode, with the blue indicator light flashing quickly. Once the connection is
established, the indicator light will stay on for 2 seconds. If the device fails to connect, the indicator light will turn off and
the keyboard will enter sleep mode.
2.4G Pairing
After turning on the keyboard, press FN+Y to enter 2.4G mode. Then press and hold the FN+Y combination key for 3
seconds to enter pairing mode. Then insert the receiver, and the indicator light will flash quickly. Once pairing is successful,
the LED indicator will stay on for 2 seconds. If no available device is found within 30 seconds, the LED indiactor will turn off
and the keyboard will enter sleep mode.
Battery Level Check
Press the Fn + Space combination keys to check the battery level. If the battery level is below 30%, the space key will
show a red light. If it's between 30-50%, the space key will show an orange light. If it's between 50-70%, the space key
will show a purple light. If it's between 70-90%, the space key will show a yellow light. If it's 90-100%, the space key will
show a green light.
Key/Lighting Effects Customization Instruction
1. The driver can be connected and lighting and key can be customized under the three working modes of the keyboard
2. The three working modes of the keyboard can be matched to drive the music rhythm
3. Please download the Akko Cloud driver on our website
4. Users can download the driver via en.akkogear.com
Short press to connect with
slow flashing blue LED;
Press and hold to pair device
with fast flashing blue LED.
Short press to connect with
slow flashing green LED;
The lighting effect will be
restored when pairing
succeeds.
FN
Back Switch indlcator
Left: Windows (built-in power supply on)
Medium: Default Mac (built-in power supply off)
Right: Mac (built-in power supply on)
09
01