Akko 5075B-Plus Gebruikershandleiding - Pagina 10

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Akko 5075B-Plus. Akko 5075B-Plus 12 pagina's.

5075B Plus Connection usage guide

Bluetooth Device 1

Bluetooth Device 2

Bluetooth Device 3

2.4G Wireless Device

Wired mode

Bluetooth Pairing

After turning on the keyboard, press FN+E/R/T to enter Bluetooth mode. Press and hold the FN+E/R/T combination key

for 3 seconds to put the keyboard in pairing mode, with the blue indicator light flashing quickly. Once the connection is

established, the indicator light will stay on for 2 seconds. If the device fails to connect, the indicator light will turn off and

the keyboard will enter sleep mode.

2.4G Pairing

After turning on the keyboard, press FN+Y to enter 2.4G mode. Then press and hold the FN+Y combination key for 3

seconds to enter pairing mode. Then insert the receiver, and the indicator light will flash quickly. Once pairing is successful,

the LED indicator will stay on for 2 seconds. If no available device is found within 30 seconds, the LED indiactor will turn off

and the keyboard will enter sleep mode.

Battery Level Check

Press the Fn + Space combination keys to check the battery level. If the battery level is below 30%, the space key will

show a red light. If it's between 30-50%, the space key will show an orange light. If it's between 50-70%, the space key

will show a purple light. If it's between 70-90%, the space key will show a yellow light. If it's 90-100%, the space key will

show a green light.

Key/Lighting Effects Customization Instruction

1. The driver can be connected and lighting and key can be customized under the three working modes of the keyboard

2. The three working modes of the keyboard can be matched to drive the music rhythm

3. Please download the Akko Cloud driver on our website

4. Users can download the driver via en.akkogear.com

Short press to connect with

slow flashing blue LED;

Press and hold to pair device

with fast flashing blue LED.

Short press to connect with

slow flashing green LED;

The lighting effect will be

restored when pairing

succeeds.

Back Switch indlcator

Left: Windows (built-in power supply on)

Medium: Default Mac (built-in power supply off)

Right: Mac (built-in power supply on)