- ページ 11

自動車アクセサリー ClearView RT-RT110のPDF 取付説明書をオンラインで閲覧またはダウンロードできます。ClearView RT-RT110 20 ページ。

Assembly Instructions

Arm Clamp for fine

width adjustment

5. Re-install M6 ARM CLAMP BOLTS and M6 NYLON INSERT HEX NUTS back into

HUB ARMS after the SUPPORT ROD is inserted. (Do not tighten yet.)

6. Position the left and right FLAP SUPPORT RODS so the width adjustment

holes face forward horizontally. Refer Image 5.

Flap Retainer Bolt

through both parts

Flap Position Holes

Small & mid sized vehicles

Full size vehicles

Large sized vehicles

(dual axles, motorhomes..)

7. Slide FLAP CLAMPS over the FLAP SUPPORT RODS with square holes facing

away from vehicle. Do not secure with FLAP RETAINER BOLTS yet.

Refer Image 6 for orientation of flap retainer bolt hole and flap support rod

positioning holes.

NB: MUDFLAP not yet attached in Image 6.

Flap position holes

must face forward

clearviewaccessories.com.au

Flap Support Rods

Rod End Caps with

Nut and Bolts

IMAGE 6

Slide carefully

Flap End Cap

IMAGE 5