- ページ 4

スイッチ Edgewater Networks 4200 SeriesのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Edgewater Networks 4200 Series 8 ページ。 Converged network appliance

Step 2 – connect to your 4200

The 4200 is shipped with a pre-configured IP address on its LAN port of 192.168.1.1.

To connect to the 4200, do the following:

•

Configure your PCs ethernet adapter to use an IP address of 192.168.1.2

and a subnet mask of 255.255.255.0. (If using a LAN switch then the

switch must support 100Mbps full duplex).

•

Launch a Web browser on the PC and enter the URL 192.168.1.1.

•

Press Return. The initial 4200 main configuration menu appears.

•

Select the Network link - enter the username "root" and the password

"default."

•

Continue to configure the LAN and WAN ports and the rest of the

appliance using the information in Step 3 below as a guideline.