- ページ 5
DJ機材 ArtFox Matrix Hybrid CMYのPDF マニュアルをオンラインで閲覧またはダウンロードできます。ArtFox Matrix Hybrid CMY 14 ページ。 350w led cmy hybrid moving head with cmy color mixing , beam 4 degrees, 4-36 degrees zoom for spot, cmy for wash, beam/spot/wash, 3 in 1
ページを印刷するconnect the product exclusively to 230 V, 50 Hz A/C!
⚫
Always ensure during installation, operation, transport and when storing the product that the mains
cord is not exposed to possible mechanical damage, or damage caused by humidity, fluids, heat or
cold!
⚫
The product's cable entry must not be exposed to stress from pull! Create the mains connection
once the product has been installed only. Always connect the mains plug last!
⚫
The product must only be connected to a proper outlet of the public supply grid. Connect the mains
cord to suitable outlets only! Use extensions cords in compliance with specifications only! Do not
allow the mains cord to come into contact with other cords!
⚫
Ensure during installation, operation, transport and storage that none of the cables are freely
exposed! Never touch the mains cord, mains plug and outlets with wet or damp hands!
⚫
When not using the product, and prior to cleaning always disconnect the product from mains! To do
so, hold the mains plug by the handling surface and never pull the mains cord!
Never connect the device to dimmer packs!
⚫
4. Housing
⚫
Always ensure during inst3ll3tion, operation, transport and when storing the product that no shocks
or other forces impact the housing!
⚫
The housing must not touch onto any other devices or objects during operation!
⚫
Easily flammable materials, e.g. decoration material and other surfaces and objects, must maintain
a minimum distance of 3m to the housing! walls must maintain a minimum distance of 50cm to the
housing! The device must be installed on a fireproof surface only (no carpet)! Always ensure a
proper circulation of air.
Do not touch the housing during operation it will heat up. The housing is safe to touch approx. 5
minutes following the end of operation!
The device must never be carried via the projector arms. Use the carrying handles only!
Fluids must not enter the housing as this could reduce the protective insulation and may trigger short
circuits which may lead to fatal electric shocks! If fluids have entered, disconnect the mains plug
immediately 3nd secure the product 3g3inst unintentional operation and contact your specialized dealer!
Damage caused as a result of fluids entering the housing is exempt from warranty.
No metal parts or other items must enter the housing as this may reduce the protective insulation or
trigger short circuits which may lead to fatal electric shocks! If metal parts or other items have entered,
disconnect the mains plug immediately, secure the product against unintentional operation and contact
your specialized dealer! Damage caused by metal parts or other items in the housing is exempt from
warranty.
5. Operating Environment
The product must be operated and stored in a dry environment only! Splash water, rain, humidity, fog
may reduce the protective insulation which may lead to fatal electric shocks! The limit value for relative
humidity is 50% at 45 ° C. A minimum distance of 1.5m to a fog machine must be observed; fog
saturation in the room must not reduce the visibility to below 10m.
The product must be operated at a temperature range of between -5 ° C and 45 ° C only. Protect
the product against direct exposure to sunlight or other heat, such as from radiators! If the product is
taken from a cold environment into a warm environment it must only be taken into operation once it has
reached ambient temperature, since the condensation created by the difference in temperature may
destroy the device!
Protect the product against dust! Dust may reduce the protective insulation, which may cause fatal
ATTENTION:
DANGER OF LIFE! RISK OF BURNS!
RISK OF FIRE! RISK OF SHORT CIRCUIT!
ATTENTION:
DANGER OF LIFE! RISK OF BURNS!
RISK OF FIRE! RISK OF SHORT
CIRCUIT!
5