- ページ 6

DJ機材 ArtFox Matrix Hybrid CMYのPDF マニュアルをオンラインで閲覧またはダウンロードできます。ArtFox Matrix Hybrid CMY 14 ページ。 350w led cmy hybrid moving head with cmy color mixing , beam 4 degrees, 4-36 degrees zoom for spot, cmy for wash, beam/spot/wash, 3 in 1

ページを印刷する

electric shocks!

The product must be operated at altitudes ranging between 20m below and 3000m above sea level

only!

The product must not be operated during thunder storms; risk of destruction from surge voltages!

The product must be operated at a minimum distance of 12 m to lit objects only!

6.Installation

This product can be operated suspended or as a stand-alone system.

Should your lighting effect show any signs of damage, do not install the device! In this case, have

your lighting effect repaired by your specialized dealer. The manufacturer does not accept responsibility

or liability for damage to property or personal injury resulting from an improperly installation!

As a stand-alone system the device must be installed vertically on an absolute planar, firm, fireproof,

shock- and vibration-free surface. The installation of this lighting effect must be carried out by trained and

professional staff! The installation of this lighting must only be carried out with the appropriate materials

The suspended installation of this lighting effect necessitates a suitable suspension system! The

lighting effect must never be fixed swinging freely in the room. No individuals should linger underneath

the lighting effect during suspended installation!

It is a must to install this device with a second independent fixture. Such second fixture must

guarantee in the event of failure of the main fixture that no assembly parts will fall down. Use the fixture

on the under-surface only.

The light effect unit must be attached via two certified hooks and omega bracket to a tie-bar system•

Use the screw threads on the under-surface only.

It must be ensured that an expert inspects the mechanical and safety-relevant installation prior to the

initial operation and following major modifications, prior to the renewed operation. It must be ensured that

an expert inspects the mechanical and safety-relevant installation at least once a year. It must be

ensured that an expert inspects the mechanical installation and the installation of relevance to safety

within the framework of an acceptance test at least every four years.

The installation fixture must be as such that it can withstand fora period of 60 minutes 10 times the

load capacity without harmful deformation.

It is prohibited for any individual to unnecessarily stay or pass beneath the installation during any

type of assembly work.

The light effect unit must be secured by a safety arrested cable if fly-mounted. The cable must

withstand 12 times the weight of the light effect unit. Use arrester cables equipped with quick closing links.

The dropping distance must not exceed 20 cm. Defect arrested cables or arrested cables that have

already been exposed to stress must not be used.

7. Operation

7.1Controls

Link all DMX devices with a DMX-512 controller by using a standard, 3-pin DMX cable or 5-pin DMX

cables. Connect the output of the first device with the input of the second device and the output of the

second device with the input of the third device and so on.

Connect the mains plug to an outlet.

Operating the product for the first time may generate smoke and odour; this is not a defect. Avoid

dis/connecting the product repeatedly and quickly from/with mains! Always wait 15 minutes prior to the

next dis/connection

ATTENTION：

DANGER OF LIFE!

ATTENTION：

RISK OF HEALTH!