- ページ 2

電動工具 Altronics Micron T 2162のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Altronics Micron T 2162 4 ページ。 Starter kit

CAUTION:
DO NOT WORK ON LIVE CIRCUITS
Before working on any mains powered equipment, make sure that it is turned off, and the mains plug
is removed from the power point. You must not undertake work on live parts.
DO NOT USE IF DAMAGED
If the power lead becomes damaged or seems faulty, discontinue use immediately. Seek the
assistance of an authorised service technician at the place of purchase to fix anything damaged.
HIGH TEMPERATURES
Soldering irons operate at high temperatures and can easily burn the skin and/or objects. Do not
touch the tip and heater at any time and keep it a safe distance from inflammable materials while the
unit is on, or while cooling after switching off. Please allow a sufficient time for it to cool before
changing tips.
MAINTENANCE AND GENERAL CLEANING:
If supply cord is damaged in anyway it must be replaced immediately, to avoid a hazard. Only a service
agent or suitably qualified person must carry out this work.
The iron may be cleaned with a damp cloth using small amounts of liquid detergent. Never submerse the
iron in liquid or allow any liquid to penetrate the case.
HOW TO SOLDER:
1.
File off any dirt, rust or paint on the part you wish to solder.
2.
Heat the part with the soldering iron.
3.
Apply rosin-based solder to the part and melt it with the soldering iron.
Note: When using non-rosin-based solder, be sure to apply a soldering paste to the part before
applying the solder.
4.
Wait for the solder to cool and harden before moving the soldered part.
Micron T 2162 Soldering Iron Starter Kit
2 |
P a g e