- ページ 6

産業機器 Fitel S327のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Fitel S327 8 ページ。 Precision cleaver

5.2. Cleaving fiber

Push the Blade Unit to the back until it latches.

①

Set a prepared fiber (stripped and cleaned) across cleaving area with

②

fiber end inserted into the Waste Bin.

Ensure that the stripped fiber is long enough to reach the Pinch Roller.

Put fiber to the appropriate v-groove on the single fiber adapter, depending

on the coating diameter of optical fiber.

In case of ribbon fiber cleaving, please use the ribbon fiber holder

(Optional parts).

When using ribbon fiber, check that the fibers are aligned horizontally and

no fibers are overlapping with each other.

ATTENTION

Fibers should be set at the appropriate length.

If it is too short to reach the Pinch Roller, the fiber shard may not be

collected in the waste bin.

If it is too long, the fiber may bend and not be cut properly.

Press the Cover of Clamp Arm until the Blade Unit starts to slide.

③

Fiber Holder