- ページ 8

産業機器 Fitel S327のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Fitel S327 8 ページ。 Precision cleaver

6. Blade and Pinch Roller Maintenance

When cleaving quality degrades, clean the top of blade and upper and lower

clamping pads with a cotton swab with a little ethyl alcohol.

After repeated use, abrasion may form on the rubber of the pinch roller. If

fiber waste can't be collected well enough, the pinch roller needs to be

replaced. Contact our service center for replacement.

The blade can be replaced by the customer.

Purchase and replace the optional parts; "Blade Exchange Set" (S327X-24).

It does not guarantee End-Face condition or Cutting Blade Life.

If the above does not solve the problem, the function may be temporarily

restored by removing the seal (light blue in the diagram below) and adjusting

the height of the cutting blade using the attached hexagonal wrench.

It does not guarantee End-Face condition or Cutting Blade Life.

After implementation, contact the service center immediately for repair.

~Raise the height of the Blade~

1. Loosen ② screw

2. Turn ① in the "+" direction of the 1 tick.

3. Tighten ② screws

~Lower the height of the Blade~

1. Turn ① in the "–" direction of the 1 tick.

2. Tighten ② screws

7. Disposal

S327 contains no hazardous substances or recyclable materials. If disposed of,

follow your local disposal regulations.

8. Contacts

For sales and service information,

Contact FURUKAWA ELECTRIC CO., LTD.

Or your local representative.

Sales Department:

Furukawa Electric Co., Ltd.

Tokiwabashi Tower, 6-4,Otemachi 2-Chome, Chiyoda-ku, Tokyo, 100-8322,

Japan