- ページ 6

ドローン dji M100-ZENMUSE X5 SeriesのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。dji M100-ZENMUSE X5 Series 15 ページ。 Gimbal installation kit

Installation

The following example uses a Matrice 100 with the battery installed under the center frame.

Power off the aircraft and remove the Intelligent Flight Battery before installation.

1. Open the battery cover by removing the screw.

2. Remove all cables connected to the battery compartment and the center frame, including the

Aircraft Status Indicator cable, CAN cable, signal cable and Flight Controller's power cable.

The cables are delicate parts. Handle with care.

3. Remove the four screws (M2.5x5) on the battery compartment. Then remove the battery

compartment.