dji M100-ZENMUSE X5 Series Kurulum Kılavuzu - Sayfa 6
Dronlar dji M100-ZENMUSE X5 Series için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. dji M100-ZENMUSE X5 Series 15 sayfaları. Gimbal installation kit
Sayfayı Yazdır
Installation
Removing the Battery Compartment and Mounting Rails
The following example uses a Matrice 100 with the battery installed under the center frame.
Power off the aircraft and remove the Intelligent Flight Battery before installation.
1. Open the battery cover by removing the screw.
2. Remove all cables connected to the battery compartment and the center frame, including the
Aircraft Status Indicator cable, CAN cable, signal cable and Flight Controller's power cable.
The cables are delicate parts. Handle with care.
3. Remove the four screws (M2.5x5) on the battery compartment. Then remove the battery
compartment.
6
©
2016 DJI. All Rights Reserved.