- ページ 15
ドローン dji M200 SeriesのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。dji M200 Series 18 ページ。
dji M200 Series にも： よくある質問 (2 ページ)
ページを印刷する
PROBLEM
The servo does not open.
The servo does not close.
The servo extends and retracts at random.
The aircraft begins hovering upwards after
attaching a payload.
The manual pin release button does not
trigger the servo to open.
The manual pin release button or switch is
physically stuck.
The red/green LED does not illuminate.
The battery will not hold a charge.
POSSIBLE SOLUTION
-
Check that the unit is powered on.
-
Ensure that the Navigation LED of your
aircraft is functioning. The LED must be on
for the servo to open.
-
Check that there is no debris covering the
light sensor in the light sensor cavity.
-
Check that the unit is powered on.
-
Ensure that the Navigation LED of your
aircraft is functioning. The LED must be off
for the servo to close.
-
Check that there is no light leaking into the
light sensor cavity.
-
Check that there is no light leaking into the
light sensor cavity.
-
Only power the unit on when attached to
the aircraft.
-
Check that there are no objects in close
proximity to the downward vision system.
-
Ensure that you have at least 1 metre/~3
feet of clearance between the aircraft's
downward vision system and the payload.
-
Check that the unit is powered on.
-
Contact DJI Shop Canada to arrange for
repair/replacement.
-
Contact DJI Shop Canada to arrange for
repair/replacement.
-
Replace the battery.
15