dji M200 Series 사용자 설명서 - 페이지 15

{카테고리_이름} dji M200 Series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. dji M200 Series 18 페이지.
dji M200 Series에 대해서도 마찬가지입니다: 자주 묻는 질문 (2 페이지)

PROBLEM

The servo does not open.

The servo does not close.

The servo extends and retracts at random.

The aircraft begins hovering upwards after

attaching a payload.

The manual pin release button does not

trigger the servo to open.

The manual pin release button or switch is

physically stuck.

The red/green LED does not illuminate.

The battery will not hold a charge.

POSSIBLE SOLUTION

Check that the unit is powered on.

Ensure that the Navigation LED of your

aircraft is functioning. The LED must be on

for the servo to open.

Check that there is no debris covering the

light sensor in the light sensor cavity.

Check that the unit is powered on.

Ensure that the Navigation LED of your

aircraft is functioning. The LED must be off

for the servo to close.

Check that there is no light leaking into the

light sensor cavity.

Check that there is no light leaking into the

light sensor cavity.

Only power the unit on when attached to

the aircraft.

Check that there are no objects in close

proximity to the downward vision system.

Ensure that you have at least 1 metre/~3

feet of clearance between the aircraft's

downward vision system and the payload.

Check that the unit is powered on.

Contact DJI Shop Canada to arrange for

repair/replacement.

Contact DJI Shop Canada to arrange for

repair/replacement.

Replace the battery.