- ページ 7

マイク ARTHUR HOLM AHDTLM UCのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。ARTHUR HOLM AHDTLM UC 16 ページ。 Motorized microphone system for underneath installation

Controls

On upper cover plate, there are tree push buttons to control the functions

and to external control other devices (GPO).

DOWN: Control the down microphone lift movement

Customized: The central push button, is used to control external

devices. The contact close button (GPO) is present on SubD9

connector to external control other devices

TALK or GPO: The third push button has two different functions

PA mode: Working in PA mode, this button is used as MUTE

function. Press one time the button, the ring LED goes to red

indicating that the mute is not active and you can talk to the

audience. Press once the button, the ring LED change to green

indicating that the MUTE is active and the microphone is not

working

Conference mode: In conference mode, the microphone is

controlled by the external conference system. Then, this button

has no function and the contact close of the push button is present

on the SubD9 control connector (GPO). In this case, there are two

GPO buttons available

Dynamic ring LED: The system has a ring LED to indicate the status of

the microphone: RED the MUTE is not active, and GREEN the MUTE is

active. When the equipment is configured to work as conference mode

the RING LED is external controlled by GPI on the SubD9 external

control connector