- ページ 8

マイク ARTHUR HOLM AHDTLM UCのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。ARTHUR HOLM AHDTLM UC 16 ページ。 Motorized microphone system for underneath installation

Connections

Microphone out: XLR connector of the microphone installed in the

DynamicTalk

12V DC IN: XLR4 connector to the power supply

1,2: Ground

3,4: 12VDC

GPI/GPO: SubD 9 pins female connector to contact close external

functions. Connect the external UP/DOWN push button to this

connector

1,6

8,9

Only in conference mode

NOTE: In conference MODE, if the 2 and 3 pin are not connected to

ground, the ring LED is off.

Function

Contact close of the customised push button

on upper cover plate (central button).

100mA Max.

Contact close of the TALK push button on

upper cover plate, only in conference mode.

This function is not working when the device

is configured in PA mode

100mA Max.

Activates the ring RED LED in conference

mode, connecting to GPI ground

Activates the ring GREEN LED in conference

mode, connecting to GPI ground

Connect this pin to GPI ground to rise up

the microphone

Connect this pin to GPI ground to down the

microphone

GPI ground