- ページ 11

電動工具 EDILGRAPPA MU 22NのPDF 使用方法とメンテナンスをオンラインで閲覧またはダウンロードできます。EDILGRAPPA MU 22N 20 ページ。 Machine body with interchangeable heads

Follow the indications concerning foreseen use and residual risks contained in the

use and maintenance manual of the work head attached to the machine.

The machine must only be used with heads that are compatible with the machine body in

question, as indicated on page 2 of this manual. The heads must be EDILGRAPPA s.r.l.

and purchased from an authorised dealer. The machine has been designed and

developed to operate in fields, such as building and industry, and for emergency/rescue

operations.

The machine may only be used if powered by an electrical system compliant with

legislation and current law (suitably connected to an earth system and protected from

current surges and short circuits).

Any use other than that expressly indicated shall be considered as improper and

therefore not permitted.

Edilgrappa S.r.l. declines all liability for any improper use of the machine and for any

modification or change made to it.

Operators must observe the instructions in this manual and in the manual of the head

fitted to the machine in order to minimise the risk of accidents. In particular, they must pay

attention when working in conditions that could cause:

- Possible burns from overheated metal parts;

- Injury due to incorrect positioning or inadequate lifting or moving

- Injury caused by splinters discharged from the work piece.

People remaining in the vicinities of the machine while it is working are subject to the

following risks:

- flying debris (dangerous objects, etc...);

Operating temperature

· It is strictly forbidden to use the machine for purposes other than those

indicated in this installation and maintenance manual.

· It is forbidden to use the machine in areas subject to the risk of explosion.

-40° ÷ +50° C

MU 22N