- ページ 5
コントローラー Cleco Tools CellCore P2402KAのPDF クイック・インストール・マニュアルをオンラインで閲覧またはダウンロードできます。Cleco Tools CellCore P2402KA 16 ページ。 Data transmission
ページを印刷する
2
System layout
The communication between the controller and the tool is possible via WLAN or Bluetooth.The access point
is integrated in the mPro200GC-AP controller. To communicate with the controller, the tools must be in the
mPro mode.
2.1
WLAN communication
The system layout described is based on communication via WLAN. The access point is integrated in the
mPro200GC-AP controller. The tools can communicate according to the following standard:
Tool
CCBA, CCBP
Abb. 2-1: System layout with mPro200GC-AP
2.1.1
Data on the tool
Features
Standard
Safety
Range
Channels
Transmission
power
Sensitivity
Modulation
a. ) PEAP (without client certificates)
Apex Tool Group
Standard
WLAN dual band:
2.4 GHz/5 GHz Standard IEEE 802.11 a/b/g/n
Integrated access point
Data
IEEE 802.11a/b/g/n
•
WEP 64/128 encryption
•
WPA/WPA2 TKIP/AES
a
•
802.1x LEAP, PEAP
Typically up to 50 m
•
1 – 13 (2.412 – 2.472 GHz)
•
36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136,
140, 149, 153, 157, 161, 165 (5.180 – 5.825 GHz)
20 dBm
-95 dBm (typ. @ 1 Mbps DSSS, 2.4 GHz)
-66.3 dBm (typ.@ 40 MHz MCS7 MM 4K)
-92.5 dBm (typ. @ 6 Mbps OFDM, 5 GHz)
-69.3 dBm (typ @ 40 MHz MCS7 MM 4K, 5 GHz)
CCK/DSSS/OFDM
P2402KA | 2019-05
CCBA/CCBP (mPro mode)
mPro200GC-AP
2
System layout
EN
5