- ページ 10

産業用PC Artila Matrix-512のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Artila Matrix-512 17 ページ。 Linux arm9 industry box computer

Matrix-512 User Guide

3.12 Factory Default Settings

LAN 1 IP Address: 192.168.2.127

LAN 2 IP Address: DHCP

Password: guest

Supervisor: root (ssh supported)

Password: root

To configure the IP address, Netmask and Gateway setting, please modify /disk/etc/rc as following:

ifconfig eth0 192.168.2.127 netmask 255.255.255.0

For DHCP setting:

dhcpcd eth1 &

Matrix-512 supports wireless LAN by using USB WLAN adaptor which uses Ralink RT2571 (rt73)

controller. Please refer to the website http://ralink.rapla.net for the supporting list of the USB WLAN

adaptor.

To configure the wireless LAN setting, please use command:

ifconfig wlan0 up

iwconfig wlan0 essid XXXX key YYYYYYYY mode MMMM

For infrastructure mode XXXX is the access point name and YYYYYYYY is the encryption key and

MMMM should be managed.

For Ad-Hoc mode mode XXXX is Matrix-512, the device name and YYYYYYYY is the encryption key

and MMMM should be ad-hoc.

To configure the IP address use command

‧6‧