Artila Matrix-512 사용자 설명서 - 페이지 10

{카테고리_이름} Artila Matrix-512에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Artila Matrix-512 17 페이지. Linux arm9 industry box computer

Matrix-512 User Guide

3.12 Factory Default Settings

LAN 1 IP Address: 192.168.2.127

LAN 2 IP Address: DHCP

Password: guest

Supervisor: root (ssh supported)

Password: root

To configure the IP address, Netmask and Gateway setting, please modify /disk/etc/rc as following:

ifconfig eth0 192.168.2.127 netmask 255.255.255.0

For DHCP setting:

dhcpcd eth1 &

Matrix-512 supports wireless LAN by using USB WLAN adaptor which uses Ralink RT2571 (rt73)

controller. Please refer to the website http://ralink.rapla.net for the supporting list of the USB WLAN

adaptor.

To configure the wireless LAN setting, please use command:

ifconfig wlan0 up

iwconfig wlan0 essid XXXX key YYYYYYYY mode MMMM

For infrastructure mode XXXX is the access point name and YYYYYYYY is the encryption key and

MMMM should be managed.

For Ad-Hoc mode mode XXXX is Matrix-512, the device name and YYYYYYYY is the encryption key

and MMMM should be ad-hoc.

To configure the IP address use command

‧6‧