Artila Matrix-512 사용자 설명서 - 페이지 8
{카테고리_이름} Artila Matrix-512에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Artila Matrix-512 17 페이지. Linux arm9 industry box computer
페이지 인쇄Matrix-512 User Guide
3.8 Serial Console Port: (P3)
Serial console port share the connector with Serial port 3 but the pin definition as shown as follow:
The console cable can be ordered and its part number is 91-DBCON-100. Its configuration can be
found at document Matrix-512 console cable.
3.9 Enable / Disable Serial Console Port
The serial console port is disabled as factory default setting. To enable the serial console, you need
to purchase or prepare a serial console cable and connect it to port 3. Right after powering on the
system, keep typing $ continuously until you see the message as shown in the figure followed.
Console (ttyS0) stands for console port ttyS0 is enabled. Repeat this procedure will disable the serial
console and Screen will show "Console (null)".
Pin No.
RS-232
1
--
2
--
3
--
4
--
5
GND
6
--
7
TXD
8
RXD
9
--
‧4‧
Port 3
Baud Rate: 115200
Data bits: 8
Parity: N
Stop bit: 1
Terminal type: ANSI