- ページ 2

リモコン Custom Dynamics MAGICZONE-BTのPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Custom Dynamics MAGICZONE-BT 7 ページ。 Bluetooth command remote

Wiring The Remote

For joining large quantities of wires, we recommend using cage clamp connectors, (included with most Custom Dynamics LED accent lighting

Kits). The cage clamps offer easy connection of the LEDs to the Magic™ Zone Remote. Strip back enough insulation on the wires and termi-

nate as follows:

RED wire with Fuse - Connect to the [ + ] Positive terminal of 12 volt battery or power source.

BLACK wire - Connect to the [ - ] Negative terminal of 12 volt battery or power source.

WHITE wire - Positive current connection point: Connect to the positive [ + ] wires from the LEDs in all 3 zones.

RED wire - Zone 1 Connection point: the negative [ - ] wires from the LEDs from zone 1.

GREEN wire - Zone 2 Connection point: the negative [ - ] wires from the LEDs from zone 2.

BLUE wire - Zone 3 Connection point: the negative [ - ]wires from the LEDs from zone 3.

Once wiring is completed, clean up installation and secure the module. Make sure wiring is neat and will not be pinched, frayed or cut,

when the seat is installed.

Re-connect the negative battery terminal, then use the Key Fob to test the LEDs. See page 3 for Key Fob features.

Magic™ Zone-BT Wiring Diagram

Positive [ + ] Wires

From all LED's

12V Battery

Questions? Call us at: 1 (800) 382-1388

Installation Instructions - Page 2

Zone 1 = Negative [ - ]

wires from LEDs

We recommend

Cage Clamps®

Fuse

Optional Kill Switch

(Sold Separately)

Zone 2 = Negative [ - ]

wires from LEDs

Blue

Green

Red

White

Red

Black

M-TH 8:30AM-5:30PM / FR 9:30AM-5:30PM EST

Zone 3 = Negative [ - ]

wires from LEDs

Magic™ Zone 4-BT

05-2016SM