- ページ 11
メディア・コンバーター DK-TEC LS6000CのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。DK-TEC LS6000C 14 ページ。 Wood splitters 6 and 8 tons
ページを印刷するHydraulic equipment:
Tightening must be checked at hydraulic hoses and couplings after
approximately 4 hours of operation and tightening must be carried
out if necessary.
Hydraulic oil / tank
Ordinary hydraulic oil can be used for all clovers. Oil
change is not necessary.
Transportation:
All wood splitters are equipped with large wheels. To transport the mower, grasp the handle of
the mower head with one hand and the handle above the motor with the other hand and gently tilt
the mower toward you. In this position, the clover can be easily moved.
To prevent hydraulic oil leakage, the clover must never moved when it is lying down. Lower
the riving blade completely when moving the machine.
Betrayal
No cleavage effect
The green button does not stay
lit
Hydraulic pump pipes; the
cleaver moves
The machine must not be used for anything other than the work for which the machine was
designed and which is described in this user manual.
Transport instructions
Betrayal
Cause
•
Wrong direction of
rotation (400 V only)
•
Too little hydraulic oil
•
The shift rod is bent; the
hydraulic lifter is not fully
pressed
•
Earth connection
not connected
•
Defective fuse etc. (400 V
only)
•
2-phase operation (400 V)
•
Too little hydraulic oil
Solution
•
Have the direction of
rotation changed by a
professional
•
Add hydraulic oil
•
Adjust the rod
mechanism; tighten the
relevant nuts.
•
Have the cable or
network checked by a
professional
•
Check the cable
•
Add hydraulic oil
11