- ページ 6

楽器 Artist Guitars TL DIY KITのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Artist Guitars TL DIY KIT 14 ページ。

TL DIY KIT MANUAL

ASSEMBLING OF TUNERS

Before attaching the neck to the body, ﬁt the tuning machine heads to the

headstock by inserting the thread through the pre-drilled holes and setting a

washer and bush over it. Screw down the bush onto the thread until it ﬁts

tightly to the touch and then adjust the rear of the machine-head so that the

tuning button sits vertically above the top edge of the headstock.

Fix the retaining screw through the loop on the rear of the gear housing into

the pilot hole to hold the tuner in position. Then tighten the nut on the front

face of the tuner until it is ﬁrm by using a spanner of the correct size.

Repeat this for the remaining ﬁve tuners and then ﬁt the string tree.