ページを印刷するNano Installation Guide
Uni-T Nano Hybrid
Uni-T
b)
Bottom bracket with
teeth facing upwards
Top Cap
Déc. 2007
"N" Connector
a)
Uni-T
Top bracket with
c)
teeth facing downward
Connector Cover
a) Use the "N" connector to join
2 Uni-T panels side by side
b) Remove the top cap from the Nano screen
c) Install the Uni-T brackets in the vertical
profile of the Nano screen, being careful to
follow the direction of the teeth as in the
drawing to the left. Tighten them only
enough to allow them to stay in place.
d) Bring the Nano screen towards the Uni-T
panel and insert the brackets in the "N"
connector. Lift the bottom bracket and
tighten the screws, then tighten the screws
in the top bracket.
e) Finishing:
Install the vertical connector
(if necessary) and the top cap.
e)
d)
pg.1