- ページ 4

スイッチ Aluprof AC250-02のPDF アセンブリとプログラミング・マニュアルをオンラインで閲覧またはダウンロードできます。Aluprof AC250-02 6 ページ。 Under plaster switch with radio receiver
Aluprof AC250-02 にも：プログラミング・マニュアル (7 ページ)

ページを印刷する

PROGRAMMING MANUAL FOR AC250-02 UNDER PLASTER SWITCH WITH RADIO RECEIVER

7. TIMER SETTING

Switch to "Timer" (T) mode.

Press "LEFT" / "RIGHT" to select

the position to change.

Pressing 'UP' / 'DOWN'

change its value.

The setting mode will close after 10 seconds of inactivity and the changes will not be saved.

8. LOCKING OF THE BUTTONS

Press and hold the "STOP"

button for 4 seconds.

9. UNLOCKING OF THE BUTTONS

Press and hold the "STOP"

button for 4 seconds.

Select the required "Timer

Mode" (T) option.

To save the settings press

the "MENU" button. The arrow

will change to the

opposite direction

After 2 seconds,

"SET" will be displayed.

After 2 seconds,

"SET" will be displayed.

Press and hold the

"MENU" button for 4 seconds.

The hour will flash.

Repeat the previous two steps

until none of the arrows are

displayed.

After 4 seconds,

"LOCK" will be displayed.

Release the button.

After 4 seconds,

"Good" will be displayed.

Release the button.

The arrow on the display

indicates the direction in which

the settings are being made.

The timer has been set.

The buttons have been blocked.

The buttons have been

unlocked.

We reserve the right to any technical change.

Valid on 2021.05.27