Aluprof AC250-02 Manual de montagem e programação - Página 4

Procurar online ou descarregar pdf Manual de montagem e programação para Interruptor Aluprof AC250-02. Aluprof AC250-02 6 páginas. Under plaster switch with radio receiver
Também para Aluprof AC250-02: Manual de programação (7 páginas)

Imprimir página
PROGRAMMING MANUAL FOR AC250-02 UNDER PLASTER SWITCH WITH RADIO RECEIVER
7. TIMER SETTING
Switch to "Timer" (T) mode.
Press "LEFT" / "RIGHT" to select
the position to change.
Pressing 'UP' / 'DOWN'
change its value.
The setting mode will close after 10 seconds of inactivity and the changes will not be saved.
8. LOCKING OF THE BUTTONS
Press and hold the "STOP"
button for 4 seconds.
9. UNLOCKING OF THE BUTTONS
Press and hold the "STOP"
button for 4 seconds.
4
Select the required "Timer
Mode" (T) option.
To save the settings press
the "MENU" button. The arrow
will change to the
opposite direction
After 2 seconds,
"SET" will be displayed.
After 2 seconds,
"SET" will be displayed.
Press and hold the
"MENU" button for 4 seconds.
The hour will flash.
Repeat the previous two steps
until none of the arrows are
displayed.
After 4 seconds,
"LOCK" will be displayed.
Release the button.
After 4 seconds,
"Good" will be displayed.
Release the button.
The arrow on the display
indicates the direction in which
the settings are being made.
The timer has been set.
The buttons have been blocked.
The buttons have been
unlocked.
We reserve the right to any technical change.
Valid on 2021.05.27