- ページ 8

ホブ Alva GDH100のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Alva GDH100 18 ページ。
Alva GDH100 にも：マニュアル (17 ページ)

Before placing the hob in the counter cut out, the supplied foam

sealing strip must be attached to the underneath of the lip of the

hob. This prevents dirt and moisture from the counter top seeping

under the hob.

After installation the space under the hob must be at least 30mm.

The distance between the hob and the wall must be at least 35mm.

If an extractor hood is to be used the distance between the top of

the gas hob and the bottom of the hood must be at least 650mm.

If this appliance is not being installed in a built-in structure, there

should be an insulation layer between the appliances bottom and

other components

LPG (Liquid Petroleum Gas) installation

•

Soak the end of the gas-supply hose in hot water to soften it.

•

Then push the hose end fully over the gas-supply nozzle located

at the rear of the hob (see picture below).

•

Secure the hose by tightening the hose clamp (see sketch below)

•

Similarly, secure the other end of the hose to the regulator on the

gas bottle.