- ページ 14

改札口 Alvarado Supervisor 500のPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Alvarado Supervisor 500 19 ページ。 Barrier-free optical counting turnstile

ページを印刷する

Configuring the SU500 (cont.)

Configuring the GateWatch Server IP Address

1. Verify GATEWATCH is set to "ON".

2. Scroll down to the GateWatch Settings section and locate the GSERVER_IP_ADDRESS= line.

3. Enter the GateWatch server IP address

4. Click the File drop-down menu and click Save.

5. Click X in the upper-right corner until back at the home screen [Figure 30].

6. Close UltraVNC Viewer

7. Cycle power to the SU500 for the changes to take effect.

Figure 30

ModelConfig Settings

Page 26

For Assistance: [email protected] +1 (909) 591-8431

SU500 Installation Instructions

Testing Lane Functionality

Perform the following turnstile functionality tests to validate basic turnstile operation. Tests are provided for Count and No Passage

modes.

COUNT MODE

To perform this test, set the SU500 to Count mode in either the entry or exit direction.

NO PASSAGE MODE

To perform this test, set the SU500 to No Passage mode in either the entry or exit direction.

PUD1456R5-0

PUD1R5-0

TEST

PROCEDURE

Count Direction

Enter the lane and complete a passage.

TEST

PROCEDURE

Walk through the lane in direction set to No

Passage mode.

No Passage

Direction

For Assistance: [email protected] +1 (909) 591-8431

TURNSTILE RESPONSE

•

Count output is generated in the

direction of the passage.

•

No alarm sounds as the user enters and

exits the turnstile.

TURNSTILE RESPONSE

•

Unauthorized Entry alarm sounds.

•

Count output is generated in the

direction of the violation.

Page 27