Alvarado Supervisor 500 Manual de instruções de instalação - Página 14
Procurar online ou descarregar pdf Manual de instruções de instalação para Torniquetes Alvarado Supervisor 500. Alvarado Supervisor 500 19 páginas. Barrier-free optical counting turnstile
Imprimir página
Configuring the SU500 (cont.)
Configuring the GateWatch Server IP Address
1. Verify GATEWATCH is set to "ON".
2. Scroll down to the GateWatch Settings section and locate the GSERVER_IP_ADDRESS= line.
3. Enter the GateWatch server IP address
4. Click the File drop-down menu and click Save.
5. Click X in the upper-right corner until back at the home screen [Figure 30].
6. Close UltraVNC Viewer
7. Cycle power to the SU500 for the changes to take effect.
Figure 30
ModelConfig Settings
Page 26
For Assistance: [email protected] +1 (909) 591-8431
SU500 Installation Instructions
SU500 Installation Instructions
Testing Lane Functionality
Perform the following turnstile functionality tests to validate basic turnstile operation. Tests are provided for Count and No Passage
modes.
COUNT MODE
To perform this test, set the SU500 to Count mode in either the entry or exit direction.
NO PASSAGE MODE
To perform this test, set the SU500 to No Passage mode in either the entry or exit direction.
PUD1456R5-0
PUD1R5-0
TEST
PROCEDURE
Count Direction
Enter the lane and complete a passage.
TEST
PROCEDURE
Walk through the lane in direction set to No
Passage mode.
No Passage
Direction
For Assistance: [email protected] +1 (909) 591-8431
TURNSTILE RESPONSE
•
Count output is generated in the
direction of the passage.
•
No alarm sounds as the user enters and
exits the turnstile.
TURNSTILE RESPONSE
•
Unauthorized Entry alarm sounds.
•
Count output is generated in the
direction of the violation.
Page 27