- ページ 8

音楽機材 aion theseusのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。aion theseus 12 ページ。 Dual overdrive

DRILL TEMPLATE

Cut out this drill template, fold the edges and tape it to the enclosure. Before drilling, it's recommended
to first use a center punch for each of the holes to help guide the drill bit.
Ensure that this template is printed at 100% or "Actual Size". You can double-check this by measuring
the scale on the printed page.
LED hole drill size assumes the use of a
size accordingly if using something different, such as a 3mm bezel, a plastic bezel, or just a plain LED.
INCH
0
1
CM
0
1
2
THESEUS DUAL OVERDRIVE
5mm LED
LOOP
OUTPUT
RETURN
ø3/8"
ø7/16"
1.60"
(40.6mm)
VOLUME (B)
DRIVE (B)
x: -1.725, y: +1.14
x: -0.575, y: +1.14
ø9/32"
ø9/32"
TONE (B)
x: -1.725, y: -0.01
ø9/32"
x: -1.60, y: -1.36
x: -0.825, y: -1.36
ø15/32"
ø5/16"
CHANNEL B
bezel, available from several parts suppliers. Adjust
LOOP
DC
SEND
ø1/2"
ø7/16"
0.80"
0.80"
(20.3mm)
(20.3mm)
1.60"
(40.6mm)
DRIVE (A)
x: +0.575, y: +1.14
ø9/32"
CENTER (0,0)
x: +0.825, y: -1.36
ø5/16"
INPUT
ø3/8"
VOLUME (A)
x: +1.725, y: +1.14
ø9/32"
TONE (A)
x: +1.725, y: -0.01
ø9/32"
x: +1.60, y: -1.36
ø15/32"
CHANNEL A
8