aion theseus 사용 설명서 - 페이지 8

{카테고리_이름} aion theseus에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. aion theseus 12 페이지. Dual overdrive

페이지 인쇄

DRILL TEMPLATE

Cut out this drill template, fold the edges and tape it to the enclosure. Before drilling, it's recommended

to first use a center punch for each of the holes to help guide the drill bit.

Ensure that this template is printed at 100% or "Actual Size". You can double-check this by measuring

the scale on the printed page.

LED hole drill size assumes the use of a

size accordingly if using something different, such as a 3mm bezel, a plastic bezel, or just a plain LED.

INCH

THESEUS DUAL OVERDRIVE

5mm LED

LOOP

OUTPUT

RETURN

ø3/8"

ø7/16"

1.60"

(40.6mm)

VOLUME (B)

DRIVE (B)

x: -1.725, y: +1.14

x: -0.575, y: +1.14

ø9/32"

TONE (B)

x: -1.725, y: -0.01

ø9/32"

x: -1.60, y: -1.36

x: -0.825, y: -1.36

ø15/32"

ø5/16"

CHANNEL B

bezel, available from several parts suppliers. Adjust

LOOP

SEND

ø1/2"

ø7/16"

0.80"

(20.3mm)

1.60"

(40.6mm)

DRIVE (A)

x: +0.575, y: +1.14

ø9/32"

CENTER (0,0)

x: +0.825, y: -1.36

ø5/16"

INPUT

ø3/8"

VOLUME (A)

x: +1.725, y: +1.14

ø9/32"

TONE (A)

x: +1.725, y: -0.01

ø9/32"

x: +1.60, y: -1.36

ø15/32"

CHANNEL A