- ページ 6

デジタルカメラ DNP IDW520のPDF スタートアップマニュアルをオンラインで閲覧またはダウンロードできます。DNP IDW520 17 ページ。 Id photo system
DNP IDW520 にも：クイック・スタート・マニュアル (17 ページ)

IDW520 Photo ID System

4. Starting the System

Follow the proper sequence when powering ON the system. First the

photo printer, then the IDW520 console, and finally the passport

camera.

• Power ON the ID Photo Printer.

• Press the power switch on the back of the printer. As the printer

initializes, it will check the media quantities and make sure

everything is properly installed.

• When the power light on the printer is green, it is ready for use.

• Power ON the Processor Console.

• Press and hold the power button on the right side of the console

for a few seconds.

• The console will initialize.

• When the main screen is displayed on the console and the printer

window has a green outline, you can continue.

• Once the printer and console are powered ON, a POST test image

is printed - this signals that the printer and console are connected

and ready for use.

• Power ON the ID Photo Camera.

• Make sure the battery is fully charged and the SD Wi-Fi camera

card is installed.

• Make sure the dial on the top of the camera is in the P position.

• Power the camera ON.

• The camera will initialize and the LCD screen on the back of the

camera will power on.

• Verify the system is ready for use.

• The camera icon turns green when the system is ready for use.

You are now ready to take ID photos!