- ページ 8

デジタルカメラ DNP IDW520のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。DNP IDW520 17 ページ。 Id photo system
DNP IDW520 にも：スタートアップマニュアル (17 ページ)

IDW520 Photo ID System

USING THE SYSTEM

Starting the System (for the 1

Follow the proper sequence when powering ON the system. First the photo

printer, then the IDW520 console, and finally the passport camera.

• Power ON the ID Photo Printer.

• Press the power switch on the back of the printer. As the printer

initializes, it will check the media quantities and make sure everything

is properly installed.

• When the power light on the printer is green, it is ready for use.

• Power ON the Processor Console.

• Press and hold the power button on the right side of the console

for a few seconds. Release the power button when the boot screen

appears and the console will complete booting-up.

• The console will initialize.

• When the main screen is displayed on the console and the printer

window has a green outline, you can continue.

• Once the printer and console are powered ON, a POST test image is

printed - this signals that the printer and console are connected and

ready for use.

• Power ON the ID Photo Camera.

• Make sure the battery is fully charged and the SD Wi-Fi camera card

is installed.

• Make sure the dial on the top of the camera is in the P position.

• Power the camera ON.

• The camera will initialize and the LCD screen on the back of the

camera will power on.

• Verify the system is ready for use.

• The camera icon turns green when the system is ready for use.

You are now ready to take ID photos!

time)