- ページ 2

プロジェクターアクセサリー DNP Supernova CoreのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。DNP Supernova Core 4 ページ。

Warnings

Follow all assembly instructions. Incorrect assembly can lead to screen damage and invalidate

the dnp warranty.

Be careful not to kink the film during handling as it could make permanent marks in the film.

Keep sharp objects away from the film as they can scratch the film and destroy the optical

properties.

Please note that the backside of the film is more sensitive than the frontside and should thus

be handled more carefully.

Do not apply pressure to the screen material once it is mounted on the frame.

Required tools and materials

Phillips screwdriver

M6 Allen key

Rubber hammer

Level

Tape measure

2 appropriate mounting screws (and wall plugs)

Box contents

Check box for:

Installation manual (this document)

Rolled-up screen film (image area facing out)

Left/right frame pieces (short)

Top/bottom frame pieces (long)

Inner corner brackets

Adjustment pieces (fixture+bolt+hook)

Metal rods

Wall mounts

Corner covers (rear)

Cover strips (rear)

M6 nuts

M6x20 bolts (for wall mounts)

M6x20 Allen bolts (for inner corner brackets)

Assembly procedure

See illustration on last page

Prepare a clean, flat surface to assemble the screen. Use a protective covering if

necessary. Determine how much space is needed for your size of screen.

Unpack everything but the film roll and arrange the items nearby. Be careful not to

scratch the film when taking everything else out of the box.

Place the frame pieces with the front side facing down. Note that if the working surface is

not properly cleaned or covered before use, particles can stick to the frame surface

material and in worst case damage it.

Assemble the adjustment pieces (fixture+bolt+hook, see illustration on last page)