- ページ 8

アクセサリー Eta COMPUTE SPCO0のPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Eta COMPUTE SPCO0 16 ページ。

ページを印刷する
Eta COMPUTE SPCO0 インストレーション・マニュアル
Commissioning and calibration
Talia is delivered in ship mode, with all circuitries powered down.
Typically, Talia will be provisioned in provision mode, and then put into
operation (run mode).
Once provisioned, Talia stays in run mode until a button press changes
its state.
Talia modes are changed by pressing Talia's hidden button. Two distinct
button-press lengths are supported – a long press, of at least seven
seconds, and a short press of less than 3 seconds. The power button is
located in the hole between the green and amber LEDs on the front of
Talia and can be accessed using a suitable tool.
The green LED is on steady for ten seconds when Talia exits power
down mode or ship mode. This indicates that Talia has been turned on.
The green led is pulsed at 1hz ten times when provision mode is
entered.