Eta COMPUTE SPCO0 Руководство по установке - Страница 8

Просмотреть онлайн или скачать pdf Руководство по установке для Аксессуары Eta COMPUTE SPCO0. Eta COMPUTE SPCO0 16 страниц.

Commissioning and calibration

Talia is delivered in ship mode, with all circuitries powered down.

Typically, Talia will be provisioned in provision mode, and then put into

operation (run mode).

Once provisioned, Talia stays in run mode until a button press changes

its state.

Talia modes are changed by pressing Talia's hidden button. Two distinct

button-press lengths are supported – a long press, of at least seven

seconds, and a short press of less than 3 seconds. The power button is

located in the hole between the green and amber LEDs on the front of

Talia and can be accessed using a suitable tool.

The green LED is on steady for ten seconds when Talia exits power

down mode or ship mode. This indicates that Talia has been turned on.

The green led is pulsed at 1hz ten times when provision mode is

entered.