- ページ 7

セキュリティセンサー DOEATOOW HFS-10のPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。DOEATOOW HFS-10 10 ページ。

5. History Records

All �ming measurement data is stored in the "Records"

interface.

The max storage of the device is ten pieces of �ming

measurement data.

If the device has stored ten historical records, the newly

created record will automa�cally overwrite the oldest one.

6. Data Clearing

Click the "Delete" menu and enter into the interface.

"Delete Current Data" is clearing the average value and

accumula�ng �me on the measurement page. "Delete

History Data" is clearing all data in the "Records" interface.

A�en�on: The Records cannot be recovered once they've

been cleared. When "

" shows on the upper screen, it

means the �ming measurement is in progress. At this �me,

unable to access the "Delete" interface.

Calibrate factors: Select "Calibrate Factor" and double click

it, then it will pop out "Password: 0000" on the bo�om of

the screen. Click

to adjust the password to "0018". Press

◄

, then click

modify the CF value. Click

again

◄

to save the changes. It is used to calibrate the error(20uSv -

1uSv).

Note: Default Cf=1.00

7. Alarm Limit Se�ng

Se�ng range of real-�me dosage alarm limit value:

0.1uSv-999uSv

Se�ng range of accumulated dosage alarm limit value:

1uSv-9999uSv

The unit will alarm when the reading exceeds the limit

value.