- ページ 6

ペットケア製品 Dog trace d-mute smallのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Dog trace d-mute small 13 ページ。 Electronic anti bark collar
Dog trace d-mute small にも：ユーザーマニュアル (19 ページ)

ページを印刷する

Battery installation / replacement

Use a cross-head screwdriver to remove the screws from the cover of the unit. Insert the

battery (3V lithium CR2). Mind the correct polarity marked inside. You will hear a sound

signal indicating that the battery is installed properly. If no sound signal comes out,

remove the battery immediately. Check the polarity and try again. If the unit does not

respond after reinstallation, the battery may be ﬂ at or the unit faulty and it requires

professional repair.

Before the cover is replaced, make sure the sealing is properly inserted in the slot.

Tighten the screws adequately.

If you do not use the collar for a long time, remove the battery from the unit.

How it works

The system is activated automatically by dog barking, or howling. 6 modes of correction

and sensitivity of the system can be set easily. The correction is based on an audio signal

or a correction pulse, eventually on combination of both. The collar is easy to use,

compact and waterproof. It is suitable for all dog breeds and sizes. In standby mode,

the device is waiting for barking our howling. After the ﬁ rst bark, it emits an audio signal

or an audio signal along with a correction pulse – its intensity depends on a selected

mode. If your dog keeps barking, the device responds again in the same way.

The process can be repeated 5 times at the most and then it is stopped automatically.

15 seconds after, the system is switched back into standby mode and is ready to

respond to barking again.