- ページ 9

スポーツ＆アウトドア Akrobat PRIMUS FLATのPDF インストールとユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Akrobat PRIMUS FLAT 17 ページ。 Trampoline 17 x 10 ft
Akrobat PRIMUS FLAT にも：インストールとユーザーマニュアル (10 ページ)

ページを印刷する

Attaching the frame pad

Lay the safety pad on top of the trampoline, aligning the pad section joints with the joints of the frame

and the eyelets facing up. Insert the elastic toggles through the eyelets so the loop end of the elastic faces

outwards and the toggle end is on the inside.

Flip the frame pad over and pull the elastic

band around the frame. Insert the toggle into

the loop, then rotate the toggle inwards to

secure it. Repeat with all frame pad elastics.

The last step to secure the frame pad to the

trampoline is placing springs into the "spring

loops". You will find them on the underside of

the frame pad where each pad section joins

the next one. Remove a single spring under

every loop, slip it through the loop and reattach

to the frame. Repeat with all loops. This will

prevent the front of the pads from lifting up.

INSTALLATION AND USER MANUAL - PRIMUS FLAT

Important:

The frame pad must cover the

entire frame and all springs.

AKROBAT HINT:

If you find it too difficult to get the toggles in place, wedge a

screwdriver carefully between the frame and PVC panel to

attach the toggle. Using a flat-head screwdriver (or similar),

push the loop end between the wall panel and frame. Insert

the toggle from underneath and rotate to secure. Repeat with

all elastics.