Akrobat PRIMUS FLAT Installatie- en gebruikershandleiding - Pagina 9

Blader online of download pdf Installatie- en gebruikershandleiding voor {categorie_naam} Akrobat PRIMUS FLAT. Akrobat PRIMUS FLAT 17 pagina's. Trampoline 17 x 10 ft
Ook voor Akrobat PRIMUS FLAT: Installatie- en gebruikershandleiding (10 pagina's)

Attaching the frame pad
Lay the safety pad on top of the trampoline, aligning the pad section joints with the joints of the frame
8
and the eyelets facing up. Insert the elastic toggles through the eyelets so the loop end of the elastic faces
outwards and the toggle end is on the inside.
Flip the frame pad over and pull the elastic
9
band around the frame. Insert the toggle into
the loop, then rotate the toggle inwards to
secure it. Repeat with all frame pad elastics.
The last step to secure the frame pad to the
10
trampoline is placing springs into the "spring
loops". You will find them on the underside of
the frame pad where each pad section joins
the next one. Remove a single spring under
every loop, slip it through the loop and reattach
to the frame. Repeat with all loops. This will
prevent the front of the pads from lifting up.
8
INSTALLATION AND USER MANUAL - PRIMUS FLAT
Important:
The frame pad must cover the
entire frame and all springs.
AKROBAT HINT:
If you find it too difficult to get the toggles in place, wedge a
screwdriver carefully between the frame and PVC panel to
attach the toggle. Using a flat-head screwdriver (or similar),
push the loop end between the wall panel and frame. Insert
the toggle from underneath and rotate to secure. Repeat with
all elastics.