- ページ 5
ペットケア製品 DogWatch Hidden Fence SystemのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。DogWatch Hidden Fence System 14 ページ。
DogWatch Hidden Fence System にも： オーナーズマニュアル (15 ページ)
ページを印刷する
Performance
The transmitter sends a coded digital FM radio signal through the boundary wire.
This signal can be adjusted, allowing you to control the "hidden fence" around
your property. It operates on a standard 110 volt outlet.
9
Pulse
Rate
1
Power
On/Off
Power Supply
Performance
™
Never adjust the transmitter while your dog is wearing the receiver collar.
1. Power On/Off: This switch gives you easy access to turn the transmitter on or off.
The red Power light on the front panel lets you know that it is operating.
2. Power Supply: The transmitter is powered through a power supply that is
plugged into a properly grounded 110 volt outlet. The adapter is plugged into the
transmitter jack labeled "PWR."
3. PowerPak™: Optional battery back-up system keeps the transmitter operating in the
event of a power failure. When transmitter is being powered by battery back-up, the
red power light will remain off. PowerPak plugs into the transmitter at "P-PAK".
4. Ground Wire: The green ground wire is plugged into the transmitter at the loca-
tion labeled "GND." The round connector on the green ground wire is attached
under the screw on the outlet faceplate. It will, however, only be effective if your
outlet is properly grounded. If you have any questions about having a properly
grounded outlet, consult your local electrician.
5. Loop Plug: Your system comes with zip cord with a plug on one end. This plug fits
into the hole marked "Loop" on the bottom of the transmitter. This is the beginning
of the boundary wire. Once your boundary wire has been properly installed and
.................................
Product Description
™
2
3
Power Pak™
Series PT4 Transmitter Features
.................................
Series PT4 Transmitter
4
Ground Wire
2
8
Training
Mode
7
Range
6
Loop
Monitor
Display
5
Loop Plug